Trade Mark No.: 2022609

BOD Incubator

BOD Incubator for Laboratory Use

BOD Incubator (Biochemical Oxygen Demand) is a piece of laboratory equipment used for measuring the amount of oxygen utilized by microorganisms in water or wastewater samples. The determination of BOD is one of the most common assays for quantifying pollution and assessing treatment efficiency.

BOD Incubators are designed to meet incubation criteria required in bod analysis of water and wastewater samples, fermentation studies, plant and insect studies and bacterial culturing etc. BOD Incubators are equipped with superior quality instruments. It delivers the performance, quality and reliability required by researchers and laborers worldwide.

BOD Incubators are often known as low-temperature incubators. Our BOD Incubator systems are constructed with corrosion-resistant stainless steel and fitted with branded instruments that offer reliable results and comfortable working all the time. The standard models of BOD Incubators are available from 68 liters to 425 liters in capacity; in addition, we also offer custom designs with a choice of construction materials, instruments, optional accessories and other features as per the budget of our clients. we supply BOD Incubators all over India and overseas at highly competitive prices.

BOD Incubator Manufacturers

BOD Incubators Features:

Microprocessor Control SystemPID temperature controller
Safety thermostat for over temperature protectionmeet APHA specifications Biochemical Oxygen Demand
CFC free cooling systems (branded)Printer interface (DOT Matrix)
Designed with and without orbital shakerComplete IQ, OQ and PQ documentation
Fully Adjustable ShelvesCaster wheels for easy mobility
Double walled construction with insulationAudio visual alarm alerts

BOD Incubator Diagram with Label

  1. Exterior
  2. Inner chamber
  3. Toughened glass window
  4. Air circulation fan
  5. Removable tray
  6. Temperature sensor
  7. Door hinges
  8. Door handle with lock & key
  9. PID temperature controller
  10. Analog ampere meter
  11. Pilot lamp
  12. Safety thermostat
  13. On/Off MCB
  14. Refrigeration system
  15. Power cord
  16. Caster wheels
  17. Solid door
  18. Heater
BOD Incubator Diagram with Label

BOD Incubator Working Principle

Electricity enters the system via a moulded-case circuit breaker wired to the building mains. A digital PID controller, calibrated to hold 20 C, governs the heating and cooling circuits. After programming, the apparatus typically runs continuously for five days. Once the target value is dialed in, the refrigeration compressor engages without delay. An axial fan then distributes air evenly throughout the chamber. The temperature sensor relays the actual reading to the PID loop, which adjusts outputs so the set point remains stable for the duration of the experiment.

Leading BOD Incubator Manufacturers & Suppliers in India

We are Delhi based ISO Certified leading BOD Incubators Manufacturers & Suppliers in India, We manufacture here are in various designs; choose from our standard models that are available as undercounter, floor-standing, single and double doors units etc. Each system features temperature range 2°C to 60°C with uniformity of ±0.5°C @ 20°C. Microprocessor PID controller delivers superior temperature control accuracy, required for precise results. Our features and advantages include illumination lamp, caster wheels for easy mobility, digital timer and quality certifications.

Below mentioned are technical specifications of our standard BOD incubator models, helping you to decide which unit is best suitable for your laboratory and application. If you need any customization in them, please discuss with us, we can modify the equipment and make it suitable for your requirements; GMP models also available.

OptionsOur BOD Incubator systems are designed and supplied with variety of options to suit your unique test requirements. We also supply Dissolved Oxygen (DO) meter and pH test meter for further analysis. The equipment can also be equipped with number of additional accessories including humidity system, fluorescent tube lighting, digital timer and humidity control and arrangement for incubation of co2 air mixture. If required, we also provide IQ, OQ, DQ, and PQ validation documents.

BOD Incubator Technical Specifications:

ModelBST/BOD-68BST/BOD-113BST/BOD-173BST/BOD-238BST/BOD-340BST/BOD-425
Volume68 Liters113 Liters173 Liters238 Liters340 Liters425 Liters
Capacity 2.4 cu. Ft.4 cu. Ft.6.1 cu. Ft.10 cu. Ft.12 cu. Ft.15 cu. Ft.
External ChamberMS / SS 304 / SS 316
Internal ChamberStainless Steel 304 (Optional SS 316)
Temperature Range2°C to 60°C
Temperature Uniformity+/- 0.5°C at 20°C
DisplayBacklit LED Display
Temperature controlMicroprocessor P.I.D controller
On / Off compressor control
PT 100 sensor
DoorSolid insulated door (with glass & without glass) w/ lock
ShelvesStainless steel Shelves (2 to 5), removable
RefrigerantR134a / CFC Free
Power220 Volts
Optional - Caster wheels
- Humidity system
- Light system by interior illumination w/ 3 fluorescent tubes
- Timer 0-24 hours for regulating cycle's illumination condition
- Arrangement for incubation of CO2 Air Mixture
- Combined Electronic Digital Temperature & humidity controller
- Automatic Voltage Stabilizer of 3 KVA
- Certifications (IQ / OQ / DQ / PQ)

#1 BOD Incubators Manufacturer, Exporter, Dealer, Supplier

BOD incubators are indispensable fixtures in laboratories where researchers culture plant or animal tissues, calibrate microbial biomass, or perform fine-scale ecological experiments. Their ability to create a constant, moist, and slightly warm environment has made them a silent backbone in clinical, industrial, and environmental testing rooms alike. Without one, many standard assays would lose their reproducibility almost overnight.
A BOD incubator steadily hovers the air temperature within a narrow 20-to-25 range, while the humidity stays north of 90 percent, which in turn lets bacteria and fungi break down organic compounds at a natural, unhurried pace. The iconic biochemical oxygen demand test counts how much oxygen the resident microbes pull from the surrounding liquid during that incubation window. The difference between the initial and final oxygen levels then quantifies the biodegradable load in the water sample.


BOD Incubator FAQ's

The full form of BOD Incubator is Biochemical Oxygen Demand Incubator. It is a specialized laboratory device designed to maintain a constant low temperature for incubating samples during BOD testing.

BOD Incubators are used for determining the biochemical oxygen demand of water samples. Applications include wastewater analysis, environmental monitoring, microbial growth, and pharmaceutical stability testing.

A BOD Incubator typically maintains a temperature of 20°C, ideal for BOD testing. Advanced models, such as those from Bionics Scientific, offer a range of 5°C to 60°C.

In labs, BOD Incubators are used for BOD testing, growing cold-tolerant microbes, enzyme studies, and maintaining low-temperature incubation environments essential for research.

FeatureBacteriological IncubatorBOD Incubator
Temperature Range30°C – 60°C5°C – 60°C (commonly 20°C)
Cooling SystemNot availableAvailable
ApplicationsBacterial culturesBOD testing, cold incubation
Use in LabsMicrobiologyEnvironmental analysis

A general incubator lacks cooling and is meant for warm-temperature microbiological work. A BOD Incubator includes a cooling system and is designed for low-temperature incubation needed for biochemical oxygen demand analysis.

In microbiology, BOD Incubators are essential for culturing cold-tolerant microorganisms, studying microbial activity, and maintaining stable environments for enzyme research.

  1. Set the desired temperature (commonly 20°C).
  2. Wait for the incubator to stabilize.
  3. Place your samples (e.g., BOD bottles) inside.
  4. Close the door securely.
  5. Allow incubation for the required duration (usually 5 days).
  6. Remove and analyze samples.

The best BOD Incubator manufacturer in Delhi is Bionics Scientific Technologies (P) Ltd.. Known for quality and innovation, they offer advanced BOD Incubators with digital controls, energy efficiency, and durable construction. Bionics is trusted by leading laboratories across India.

  • Accurate temperature control
  • Ideal for sensitive BOD testing
  • Energy-efficient design
  • Wide temperature range (5°C – 60°C)
  • Trusted quality from Bionics Scientific

Submit Your Request

To know more about our products, Please fill this enquiry form

Need more information

Connect with us for your business enquiries. Generally, we respond within a day.

Call Us

+91 9111161955 | 9376651333

Email us

info@bionicsscientific.com


BOD Incubators Video