Static & Dynamic Pass Box Manufacturer in India

A pass box is an enclosed transfer chamber installed between controlled areas. It allows materials to move through interlocked doors without routine personnel movement, helping the facility control contamination during transfer.

A static pass box is a passive chamber without a blower or forced filtered airflow. A dynamic pass box uses a blower and filters to flush the chamber with controlled air when the transfer risk assessment requires active contamination control.

A static pass box is generally selected for material transfer between areas with compatible cleanliness requirements when the approved process does not require forced filtered airflow. Final selection must follow the facility risk assessment and user requirement specification.

A dynamic pass box is selected when active filtered airflow or chamber flushing is required, especially for transfers between areas with different cleanliness conditions. Airflow direction, filter grade and qualification criteria must be defined for the installation.

The mechanical or electrical interlock prevents both pass box doors from being opened at the same time during normal operation. One door must close before the opposite door can open, supporting separation between the connected areas.

Bionics Scientific offers SS 304, SS 316 and SS 316L construction options. The suitable grade depends on the cleaning agents, corrosion exposure, product-contact requirements and the facility user requirement specification.

Select the chamber size from the largest material or container to be transferred, required handling clearance, wall opening and installation constraints. Share the required internal dimensions and wall thickness before quotation.

No. A UV lamp is an optional accessory and is not a replacement for an approved cleaning and disinfection process. Its inclusion, exposure controls and operating procedure should be decided by the facility quality and safety teams.

Clean internal surfaces with facility-approved agents and inspect door seals, hinges, interlocks, indicators and viewing windows at defined intervals. Dynamic models also require scheduled inspection of the blower, filters and pressure indication.

Provide the static or dynamic type, internal chamber dimensions, wall thickness, stainless-steel grade, room conditions on both sides, interlock preference, airflow and filter requirements, electrical supply, accessories, quantity and delivery location.