A transparent acrylic glove box is a lightweight benchtop enclosure for handling materials in an inert atmosphere. We are Bionics Scientific Technologies, a manufacturer with more than 35 years of experience, and we build these basic, affordable glove boxes in our own workshop for laboratories across India and overseas.
Every unit is made from 6 mm acrylic sheet, has a vacuum airlock and a side door, and can be customised for your research. If you are setting up a first inert atmosphere workstation, or you just need a simple box for general lab work, this is the place to start.
The box is fully transparent, so you can see your work from every angle. It is light enough for two people to lift and move, and it is compact enough to sit on a normal bench. Acrylic does not absorb moisture, resists chemicals and scratches, and the interior wipes clean easily. Because these are basic models, the price stays economical.
Each unit can be set up for one person (2 gloves) or two people (4 gloves).
You place your samples and tools in the vacuum airlock, close the outer door and remove the air. The chamber is then filled with an inert gas, usually nitrogen or argon. Once the atmosphere is set, you work through the gloves without letting room air in. A side door gives access for larger items.
Both models share the same design. The only difference is the pressure control.
| Made from acrylic plastic | Transparent clear view from every angle |
| Vacuum air locker and side door | Chemical and scratch resistant cabinet |
| Prevents moisture absorption | Portable size occupies less bench space |
| Easy to clean interior | Light weight construction |
| Model | BST/TGB/VGB-2 | BST/TGB/VGB-2Y |
|---|---|---|
| Pressure Controller | No | Yes |
| Digital Vacuum Pressure Gauge | No | Range: 0 to 101 kPa (Absolute Pressure) |
| Valves | Three manual valves | Three manual valves Two solenoid valves |
| Construction | Acrylic sheet | |
| Glove Box Dimension (mm) | 1150 L x 500 W x 500 H | |
| Containment Chamber (mm) | 875 L x 480 W x 500 H | |
| Air Lock Chamber (mm) | 230 L x 230 W x 230 H | |
| Plastic Thickness | 6 mm | |
| Side Door Size | 400 mm diameter | |
| Glove Port Size | 151 mm diameter | |
| Pressure Range | Main Chamber: 90 kPa to 120 kPa Air Lock Chamber: 10 kPa to 120 kPa | |
| Glove Ports | Two-Port Glove box (One Operator) | |
| Standard Accessories |
- Analog pressure gauge: 01 No. - Internal plug strip: 01 No. - Latex gloves: 01 pair | |
| Optional Accessories |
- Butyl rubber gloves - Three/Four-port glove box (same-side ports) - Four-port glove box (back-to-back ports) - Oil-free vacuum pump and fittings - Spare port (G 1/4 female) - Shelf - Extra internal plug strip - Microscope view port with flexible or movable eyepiece - Arrangement for weighing balance / hot plate - Stand (powder coated MS / stainless steel) | |
It suits general laboratory work with air- or moisture-sensitive materials, sample preparation, small-scale research and teaching labs. For background on how glove boxes keep an inert atmosphere, this university guide to operating a glovebox is a good read. If your work needs ultra-low oxygen and moisture levels, or a stainless steel build, browse our full range of glove boxes.
Start with how many people will work at the box at once, which sets the number of glove ports. Then decide whether you need accurate pressure control and a digital gauge (choose the 2Y model). Finally, list any extras such as a vacuum pump, shelf, balance arrangement or microscope port. Share these with us and we will suggest the right configuration.
The price depends on the model, the number of glove ports and the accessories you choose. Because we are the manufacturer, you get a factory price. Tell us what you need and we will send a clear quotation.
We supply across India and overseas, and we can help with installation and technical questions. Contact us for supply and installation details.
It is a benchtop enclosure made of 6 mm acrylic with glove ports and a vacuum airlock. It lets you handle materials in an inert atmosphere.
The price depends on the model, the number of glove ports and the accessories. It is one of our most economical glove boxes. Send your requirement to get a quote.
The 2Y model adds a pressure controller, a digital vacuum pressure gauge (0 to 101 kPa) and two solenoid valves. The standard model has none of these.
Items go in through the vacuum airlock, and the chamber is filled with an inert gas such as nitrogen or argon. You then work through the gloves.
The standard unit has two ports for one operator. Three-port, four-port (same side) and four-port (back-to-back) versions are optional.
The overall size is 1150 x 500 x 500 mm. The containment chamber is 875 x 480 x 500 mm and the airlock is 230 x 230 x 230 mm.
Yes. Options include butyl rubber gloves, extra ports, an oil-free vacuum pump, shelf, microscope view port, a balance or hot plate arrangement, and a stand.
Yes. We are the manufacturer and supply across India and overseas. Contact us for supply and installation details.
Tell us your application, the number of operators and any accessories you need. Our team will reply with a recommendation and a price.
Need a custom glove box setup?
Get Glove Box Price