In short: we make laboratory magnetic stirrers with and without a hot plate. The heated models (BST/MSH31, 32 and 33) stir 2, 5 or 10 litres at up to 1800 rpm and heat up to 200°C, with 300°C and 500°C as options. The unheated models (BST/MS-51 to 54) cover 500 ml to 10 litres.
A magnetic stirrer saves you from standing over a beaker with a glass rod. Drop a magnetic bar into the vessel, set the speed, and the liquid mixes on its own. Add a hot plate and you can heat the same vessel at the same time, which is why a heated stirrer is the everyday workhorse for dissolving and mixing in most labs.
Bionics Scientific is a Delhi-based, ISO certified manufacturer and supplier of laboratory magnetic stirrers, serving buyers across India and overseas. Speed and temperature controls sit on the front panel, and the standard housing is painted MS steel, with stainless steel housing available as an option. We can also tailor a unit to your needs, so please share your temperature range, material of construction, type of controls and any other requirement. If you need a stirrer that changes direction as it stirs, take a look at our auto reverse magnetic stirrer.
The question to ask is whether your sample needs warming. If you heat as well as stir, for example while dissolving a solid, take the hot plate model. If you only mix at room temperature, a model without a hot plate does the job, and it gives you smaller sizes down to 500 ml.
After that, match the size to your vessel and volume. The stirring plate gets bigger with capacity, from 4 x 4 inches on the smallest unheated model to 11.5 x 11.5 inches on the 10 litre models. If you need to mix a thick sample or run several vessels at once, you may also want an overhead stirrer or a multi-position magnetic stirrer.
| Model | BST/MSH31 | BST/MSH32 | BST/MSH33 |
|---|---|---|---|
| Stirring capacity | 2 litres | 5 litres | 10 litres |
| Stirring top size | 6 x 6 inches | 8.5 x 8.5 inches | 11.5 x 11.5 inches |
| Speed | 1800 rpm | ||
| Temperature | 200°C | ||
| Controller | Speed and temperature controller | ||
| Construction | Stirring plate: stainless steel Housing: MS powder coated | ||
| Accessories | Magnetic bar, instruction manual | ||
| Optional |
|
||
| Model | BST/MS-51 | BST/MS-52 | BST/MS-53 | BST/MS-54 |
|---|---|---|---|---|
| Stirring capacity | 500 ml | 2 litres | 5 litres | 10 litres |
| Stirring plate size | 4 x 4 inches | 6 x 6 inches | 8.5 x 8.5 inches | 11.5 x 11.5 inches |
| Stirring plate material | Stainless steel | |||
| Speed | 0 to 1800 rpm | |||
| Speed control | Rotary speed regulator | |||
| Housing | MS sheet powder coated | |||
| Power supply | 220 / 230 V, 50 Hz | |||
| Accessories | Magnetic bar and manual | |||
| Optional |
|
|||
Please confirm the power supply of the hot plate models, the exact options for your model and the lead time with our team before ordering.
Inside the base there is a rotating magnet. You place a magnetic bar in your beaker or flask, and as the magnet turns under the plate, the bar spins in the liquid and mixes it. On a hot plate model, the plate also heats the vessel, and the controls on the front panel let you set the speed and the temperature separately.
You will see a few different kinds of magnetic stirrers in the market. Here is a quick guide to what each one is for. Our standard range is the one listed in the tables above, so please ask us if you need something different.
Bionics Scientific has been making laboratory equipment for 26 years, and we operate as a unit of Kartal Projects Private Limited in Delhi. We supply PAN India and overseas, and our engineering team can discuss your temperature range, material of construction and controls and send a price list.
The certificates below are held by Kartal Projects Private Limited and issued by Euroglobe Registrars. Each one can be verified with Euroglobe Registrars using its certificate number.
| Certificate | Certificate no. | Scope | Valid until |
|---|---|---|---|
| ISO 9001:2015 Quality Management System | 184876 | Products as per annexure, which lists laboratory stirrers & hot plates | 30-03-2029 |
| CE – Directive MDD 93/42/EEC | 184877 | Technical file; products as per annexure | 30-03-2029 |
| GMP (Good Manufacturing Practices) | 184878 | Products as per annexure, which lists laboratory stirrers & hot plates | 30-03-2029 |
| NSF/ANSI 61 | 183884 | Manufacture and supply of bio-safety cabinet, laboratory equipment and scientific equipment | 08-03-2027 |
Certificate scope is as stated on each certificate. Please ask our team for the annexure covering the model you plan to buy.
Tell us the volume you stir, the temperature you need and any options you want. We will send product details, technical specifications and a quotation.
Request a Quote Call +91 9111161955You can also use the enquiry form on this page, browse the full stirrer and hot plate range, or email info@bionicsscientific.com.
It is a laboratory unit that stirs a liquid with a magnetic bar and heats the vessel at the same time.
Standard models heat up to 200°C. Temperatures up to 300°C and 500°C are available as options.
Hot plate models stir 2, 5 or 10 litres. Models without a hot plate stir 500 ml, 2, 5 or 10 litres.
Up to 1800 rpm.
Standard housing is powder-coated MS. Stainless steel housing is available as an option, and the stirring plate is stainless steel.
Options include a PID controller, digital timer, support stand, stainless steel housing and IQ / DQ / OQ / PQ certifications, depending on the model.
A magnetic bar and an instruction manual.
Models without a hot plate are listed for 220 / 230 V, 50 Hz. Please confirm the supply for hot plate models with our team.