Plasma Thawing Bath - Fresh Frozen Plasma Manufacturers, Suppliers
Bionics Scientific has been serving top-quality Plasma thawing bath to various industries from the last one decade. We are one of the leading manufacturers and suppliers of Plasma thawing bath in Asian, African and Middle East Markets. Plastma Thawing Bath is a medical used in laboratories and blood bank for thawing units of FFP i.e. Fresh Frozen Plasma and other blood components. The other uses of the laboratory machine are:
- For thawing of frozen plasma within 24 hours after phlebotomy
- For thawing of cryoprecipitated AHF
- For warming of whole blood and red blood cells
- For warming of crystalloid infusion solutions before transfusion
Salient features of Plasma Thawing Bath
The device supports the state-of-the-art technology for increasing the accuracy of blood collection and related procedures performed by healthcare professionals. Some of the salient features of FDA Approved Plasma Thawing Bath are
- Support stainless steel construction with interior chamber featuring 304 and 0.8mm thickness of corrosion resistant stainless steel.
- Notification by audio video alarm in case temperature deviates from the preset temperature
- Low and high water alarms
- Removable acrylic trays for keeping plasma bags
- Micro processor based temperature control with unmatched reliability and accuracy
- No direct contact with water
- Maintains constant temperature of 37° C
- Rapid thawing and warming with maximum thaw time is 25 minutes
- Large LED display supporting multiple languages including English
- Sturdy construction supporting continuous operation
- Supported with power backup supply in case of electrical failure
- Leak detection, overheat and auto shut off alarms
- Certified with UL and CSA standards
- Digital display of set and process value
- Rounded corners for uniform water circulation with better efficiency
- Gentle and safe heating conditions for blood thawing
- Easy to clean construction
#1 Manufacturer and supplier of Plasma Thawing Bath in India
We have set up a new benchmark as a manufacturer and supplier of Plasma Thawing Bath around the world by designing industry-ready models at affordable rates. Our entire team is competent to manufacture custom-made Plasma Thawing Bath by using high-grade raw materials and as per technical specifications of the clients. We can easily design the device with some special features like:
- Castor wheels ensuring easy mobility
- Large inch touch screen display of process and set value in various languages including English
- Machine with over 8 plasma holding bags
- Doors with heating element with no frost built-up
- Electronic documentation
Our quality inspectors check and recheck every model multiple times on various parameters to ensure flawless delivery of the final output. When Plasma Thawing Bath ordered from Bionics Scientific, clients get the following advantages:
- A high-quality product with manufacturer's warranty
- Simple and intuitive interface
- Easy to clean and maintain
- Fast doorstep delivery
- Installation and prompt after-sales services
- Competitive rates
Technical Specifications:
| Model |
BST/PTB-20 |
BST/PTB-40 |
| Volume |
20 Ltrs. |
40 Ltrs |
| Capacity |
300 ml – 05 bags
450 ml – 04 bags |
300 ml – 15 bags
450 ml – 12 bags |
| Temperature range |
37°C to 56°C |
| Temperature accuracy |
±0.5°C |
| Resolution |
±0.1°C |
| Temperature sensor |
PT100 |
| Temperature controller |
- PID temperature controller
- In-built programmable timer
- Process END buzzer
|
| Average thaw time |
20 minutes |
| Construction |
Double walled with glass wool insulation |
| Inner tank |
Stainless steel 304 |
| External cabinet |
Powder coated GI sheet |
| Tray |
Removable SS tray |
| Shaking mechanism |
Centrifugal water circulation pump |
| Heater |
ISI mark immersion heater |
| Power supply |
220 Volts 50Hz |
| Optional |
- Low / high temperature alert buzzer
- RS232 / 485 computer interface
- Exterior made of SS304
|
